Umboneleli weModyuli oPhambili oKhokelayo kunye nePinion Linear ovela eTshayina
I-TallMan Robotics Limited igxile kuphando kunye nophuhliso lwezixhobo ezizisebenzelayo ezikhethekileyo, ukuzuza impumelelo ebalulekileyo kuphuhliso lwetekhnoloji, ukwenziwa, kunye nokwandiswa kweemarike. Ukusebenzisa iteknoloji ephucukileyo, umgangatho ophezulu wemveliso, kunye nokunikezelwa kwenkonzo ebanzi, Sinoluhlu olubanzi lweendlela zokuhamba kunye nezicelo, kubandakanywa iimodyuli ze-ball screw linear, iimodyuli ze-belt linear, iimodyuli ze-IP65 ezingenamanzi, iimodyuli zomgca onzima, iimodyuli zomgca we-axis, iimodyuli ezininzi ze-axis linear, i-modyuli ye-linear kunye ne-pinion. iisilinda.
-
![Irakhi kunye nePinion Linear Module]()
Irakhi kunye nePinion Linear ModuleI-Rack kunye nePinion Linear Module yinkqubo yentshukumo ehambelanayo esebenzisa iigiya (Pinion) ukuthungatha ngeerakhi (iRakhi) yokuhanjiswa. Ngokuqhuba iigiya nge-motor ejikelezayo, umthwalo...ukujonga ngaphezulu -
![Linear Rack kunye Pinion Drive]()
Linear Rack kunye Pinion DriveI-Linear Rack kunye nePinion Drive yinkqubo yokuhambisa ngoomatshini eguqula intshukumo ejikelezayo ibe yintshukumo yomda ngokusasazwa kwe-meshing yeegiya kunye neeracks. Le nkqubo ineempawu...ukujonga ngaphezulu
Apha, kweli phepha, sazisa iimodeli ezineparameter yobugcisa ngolu hlobo lulandelayo:
Wamkelekile ukuba ubukele iiprojekthi ezininzi okanye undwendwele igalari yethu yevidiyo nguYoutube:https://www.youtube.com/@tallmanrobotics
Apha, kweli phepha, sazisa iimodeli ezineparameter yobugcisa ngolu hlobo lulandelayo:
|
Umzekelo No |
TMG135CM |
Idatha ye-tMG135CR |
TMG170CM |
I-TMG170CR |
TMG220CM |
TMG220CR |
|||||
|
Amandla eMoto (W) |
400 |
750 |
750 |
1500 |
|||||||
|
Ukuphinda-phinda (mm) |
±0.01/±0.02 |
±0.01/±0.02 |
±0.01/±0.02 |
||||||||
|
Amazinyo eGear |
22 |
32 |
30 |
||||||||
|
I-Gear Pitch |
5 |
5 |
6.666 |
||||||||
|
Umlinganiselo wokuNcitshiswa |
1:5 |
1:5 |
1:10 |
1:5 |
1:10 |
||||||
|
Inkokeli (mm) |
22 |
32 |
16 |
40/20 |
40/20 |
||||||
|
Isantya esiphezulu(mm/s) |
1100 |
1600 |
800 |
2000/1000 |
2000/1000 |
||||||
|
Isantya seMoto 3000(rpm/min) |
|||||||||||
|
Max Layisha |
I-Acceleration Deceleration |
Ukuthe tye |
0.3G |
25 |
30 |
90 |
25/60 |
60/120 |
|||
|
Ngokuthe nkqo |
0.3G |
5 |
5 |
15 |
5/10 |
10/22 |
|||||
|
Ilinganiswe ngeThrust |
56 |
98 |
490 |
60/120 |
120/240 |
||||||
|
Isikhokelo somgca (mm) |
15*12.5-2 |
15*12.5-2 |
23*18-2 |
||||||||
|
Inzwa yemvelaphi |
Phuma iplagi |
EE-SX672(NPN-SX672P(PNP) |
EE-SX672(NPN-SX672P(PNP) |
EE-SX672(NPN-SX672P(PNP) |
|||||||
|
Ngaphakathi |
E2S-W13 |
EE-SX674(NPN-SX674P(PNP) |
EE-SX674(NPN-SX674P(PNP) |
||||||||
|
Uhlobo oluvaliweyo |
Vula |
Ivalwe ngokupheleleyo- |
Vula |
Ivalwe ngokupheleleyo- |
Vula |
Ivalwe ngokupheleleyo- |
|||||
I-TallMan Robotics Limited yenye yeemodyuli ezichwephesha kakhulu kunye nepinion abavelisi kunye nababoneleli eTshayina. Ukuba uza kuthenga iimodyuli ezikumgangatho ophezulu werack kunye nepinion linear ezenziwe eTshayina, wamkelekile ukufumana ulwazi oluthe kratya kumzi-mveliso wethu.
